Task 2 Dung/Dropping Idea - Augur Lift
Note: Everyone contributing to this doc should have already carefully read through CONOPS, found here: https://www.aerialevolution.ca/wp-content/uploads/2026/09/2027-AEAC-CONOPS-v1.0-2026-09-08.pdf
Specifically, make sure you are familiar with the task two description, and the mark breakdown.
See pages 23-26 of the CONOPS, under section 5.2.4
Big Project | Project | Project Manager |
|---|---|---|
Valkyrie | Comp 2027 | Jackson Barber |
Jackson Barber I can try to write these in within the next week, if you can fill them out yourselves that would be great
Constraints | Written By | Append Date |
|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Description
Task 2 is split into 2 main mechanical tasks, tagging and sample collection.
Tagging: We will create a custom tracker that can either be attached to the prop animal using a hook and loop fastener, or dropped in a nearby box for less points.
Sample Collection: We will look for and attempt to pick up 3 different kinds of samples
After picking these up we will drop them off in a designated location
Task Progression/Updates
Author: person updating Date: