Big Project | Project | Project Manager |
|---|---|---|
Antenna Tracker | Aluminum Yaw Servo Mount |
Task Description
The current 3D printed yaw servo mount will not be strong enough to hold the new yaw-and-pitch antenna tracker. We need to design a new yaw servo mount made out of aluminum to maintain structural integrity.
Constraints
To be written by the Project Manager. All constraints should be their own row of the table, if a constraint is removed it should be crossed out but left in the table. The append date is when the constraint was last updated (update this when constraints are removed!) DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Constraints | Written By | Append Date |
|---|---|---|
Made out of aluminum |
| |
Machinable |
| |
Integration with Height Adjustment Mechanism |
|
Relevant Contacts
To be written by the component owner and should be used if collaborating with another subteam. This should be the “component owner” of the other subteam and/or the person on those subteams. Delete if not used. DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Subteam | Contact | Contact Description |
|---|---|---|
Mechanical | Collaboration with height adjustment mechanism integration. |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
|
Task Progression/Updates
Author: Arjun Mandair Date:
First Design Without Height Adjustment Mechanism Integration
Height adjustment mechanism incomplete
Currently compatible with Tripod
Cutouts on L-Brackets are for screw clearance
