Summary

Date of Test	April 10, 2022
Participants	Shrinjay, Ryan, Aidan, Cindy, Andy
Minutes Flown (plane)
Minutes Flown (quad)

Objectives

Proof of flight video

Landing test

Flight Test with payload weight of 2kg - laps similar to how competition would be

OpenHD video transmission

Stability and validation of new airframe

Add electrical tape to new PDB

Secondary Objectives

Develop flight test checklists

High Level Tasks

Pre-Flight

Validate that OpenHD is ready for testing

Validate aircraft control and readiness for testing

Note down steps we take pre-flight to develop pre-flight checklist

At Flight

Record proof of flight video

Landing test within 58cm diameter

Payload flight test - Fly laps and measure battery

Take landing video

Validate that OpenHD video streams fine

Post-Flight

Finalize and publish flight test checklists

Note down steps we take post-flight to develop post-flight checklist

Publish endurance info

Submit proof of flight

Problems Encountered

Aircraft crash occurred. See Retrospective.

Notes

Flight Test Requirements:

Retrospective

Tasks Before Next Test

Operational changes we need to make: Manufacturing needs to ensure motor tightening and stiffness of the motor mounts and arms using additional fasteners or other methods. Perform test flights in a recommended wind of about 10kts, reduce limit to 15kts until further testing. Perform testing with aircraft further away and possibly at higher altitudes to allow for room for correction.

Videos (optional)

Should be on the google drive