Big Project | Project | Project Manager |
|---|---|---|
Payload | Drum opening fixture |
Task Description
Design a fixture that mounts to the lip of the industrial drum that is inside the Bay. This is to test that the new angled landing gear works as intended.
Link to the current drum we have: Steel Drum with Lid - 55 Gallon, Open Top, Unlined, Black S-10758 - Uline
Link to the drum at competition: EarthMinded 55 Gal. Open Top Plastic Industrial Drum with Lid and Lock-band -Off-color PFR55-OC - The Home Depot
What we really care about is the inner diameter of the drum, which is missing from any documentation, however we have measured a similar drum to have an ID of 20.5 inches
Constraints
Constraints | Written By | Append Date |
|---|---|---|
inexpensive |
| |
easy to manufacture |
|
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@ assignee | link to asana task assigned | Date assigned |
Task Progression/Updates
Author: Alison Thompson Date:
Initial Ideas
Laser cut MDF circle with 3d printed standoffs locating it on the drum. You would need 4 total standoffs, 2 tangent to the outer wall, 2 tangent to the inner wall of the drum.