Big Project | Project | Project Manager |
|---|---|---|
IMACS Groundstation | IMACS Frame | @ project manager |
Project Description
General context for this project and a list of initial hardware requirements are in Ground Control Station Integration 2025.
The mechanical team is responsible for organizing the layout of the monitor, keyboard, ports, etc. The control system will be built into a Nanuk 930 case. Some components may need to be manufactured, such as mounts for switches, ports, lights…
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Built into Nanuk 930 case | Smile | |
Fit a 6S battery or a few? | Daniel | |
supports ground station arch as outlined in the 2025 doc | Daniel | |
Use the 19” monitor that has been disassembled. It should be mounted in the top of the case as far back as possible to leave room for components on the bottom half when closed. Allow the VGA and Power cables to exit the top and enter the bottom half of the case. Make it look nice, cover the space around the monitor with polycarbonate. | Nathan Green | 2024-09-10 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Tech dir |
| |
Exec dir |
|
Assignees
Assignee | Asana Task | Date |
|---|---|---|
link to asana task assigned | Date assigned |
Task Progression/Updates
Calum: @ 2024/07/10
Created CAD model of Nanuk 930 Case based on website dimensions. The dimensions are quite vague and this is a rough idea to work off off.
Created plates from given drawings that will attach to the bottom and top of the case with #6 X 1/2" Hi-Lo Self-Tapping Sheet Metal Screws (18pcs) per plate. The case has premade threads.
Calum: @ 2024/07/17
Would like to know the dimensions and sizing of components so I can CAD them out and arrange them
