Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Requirements

  • Passthrough 18 V - 55 V (6S lower voltage to 12S upper voltage )

  • Measure current through hall effect current sensing (without a shunt resistor to minimize losses)

  • Measures voltage with an ADC

  • I2C or UART interface

    • Preference toward I2C, but just pick one of them

  • XT60 connector for input power and output power

Implementation

  • 5 V or 12 V power input on the data header

    • Power comes in from a separate source

    • May need an LDO from 5Vor12V to whatever voltage ADC requires

  • Refer to Nathan’s

  • No labels