The 24V-12V/5V buck converter is a board that will step down 24V DC to either 12V DC or 5V DC with a maximum rated output current of 3A.
It is designed to output 5V @ 3A or 12V @ 2A.
Acceptable Input Voltage:
7V-26V for 5V output mode
14V-26V for 12V output mode
Maximum Input Current: 3.4A
This buck converter can output either 5V or 12V by swapping out the resistor R6.
91KΩ resistor for R6 for 5V output
240KΩ resistor for R6 for 12V output
In addition to this, in order for the output status LED to work properly and not burn out, its resistor R8 also needs to be changed depending on the output mode.
660Ω resistor for 5V output
1KΩ resistor for 12V output
The buck converter has a variant silkscreen on the back which can be used to marker out which mode the buck is in.
Mounting Holes Information:
Complies with Mounting Hole Specifications
M2 hole spec
Mounting holes center to center are 25x35mm
Files
Step 3D model
