...
The Attitude manager state machine will be implemented in a thread of its own. A full cycle of this state machine needs to be executed at some constant frequency. The states as well as the flow between them is depicted in the drawing below. Each state corresponds to exactly 1 module action. The state machine itself only transfers data between modules. It may also repackage data to facilitate communication between modules, but it never processes or modifies and data, that is the exclusive job of the modules. The figure below depicts the states as well as the flow between them.
...
currently observed issue:
SFOutput_t *SF_output = SensorFusionMode::getSFOutput();
The SF_output struct is never got updated. in the file the struct is not updated.
possible solutions
SFOutput.pitch = attitudeOutput.pitch;
SFOutput.roll = attitudeOutput.roll;
SFOutput.yaw = attitudeOutput.yaw;
SFOutput.pitchRate = attitudeOutput.pitchRate;
SFOutput.rollRate = attitudeOutput.rollRate;
SFOutput.yawRate = attitudeOutput.yawRate;
SFOutput.altitude = pathOutput.altitude;
SFOutput.rateOfClimb = pathOutput.rateOfClimb;
SFOutput.latitude = pathOutput.latitude;
SFOutput.latitudeSpeed = pathOutput.latitudeSpeed;
SFOutput.longitude = pathOutput.longitude;
SFOutput.longitudeSpeed = pathOutput.longitudeSpeed;
SFOutput.track = pathOutput.track;
SFOutput.groundSpeed = pathOutput.groundSpeed;
SFOutput.heading = attitudeOutput.heading;
This is updating the member but is it actually updating the struct?