Meeting recording

🖥 PR’s and Reviews

Draft PR for PM auto takeoff/landing (Gordon, Stanley, Liang, Aadi(?)): https://github.com/UWARG/ZeroPilot-SW-3/pull/25

😅 STUCK!

✈ Priorities & Action Items:

fill out team roster here: https://docs.google.com/forms/d/e/1FAIpQLSfGBfnTPGSR_PkMcl-XrxltoGhgfnDmErNO390fO0g0ecRPwg/viewform
you must complete the training to work onsite. Deadline is Jan 31

• W23 Buy List Coordination (Taim , Yuchen, Ryan, Simone, Hamza)

• Deadline for flight critical systems Feb 4 & Feb 11

  • PPM, Comms, TM, etc.

  • Ideally we run an integration test feb11.

🍍 Updates this week!

(Updates here → see table of contents for structure)

ZeroPilot 3

ZP-Ardupilot Integration (Stanley, Alex)

• needs mavlink messages to be defined

  • have been defined, will be implemented

• Stanley & Alex working on driver in LOS

  • Stanley Mavlink

    • new los_mav interface

  • Alex PPM Output, Controller decoding

• Mission Commands — Plane documentation (ardupilot.org)

System Manager (Gordon, Stanley)

• Gordon to come up with payload for mavlink

• GlobalFlag object approved, waiting to merge as it is part of base ZP3 arch, not comp arch.

Path Manager (neha, Liang)

• Synced with Liang → will start waypoint following implementation

• PM Takeoff/landing builds → draft PR up (if i havent added link you have permission to yell at me)

  • I know there were some SM changes → does that affect this

  • Plan is to make it a real PR, get approved, and merge before flying on a drone then make another branch for “fixes” (this is so the branch doesn’t get super old and outdated while being tested)

Attitude Manager (Ishman, Armaan)

• needs tuning

• Anni had a quick meeting to let them know of what attitude manager is

  • Main task is to get Phoenix tuned

  • Deliverables: document on plan to get tuning done.

  • Doc:https://uwarg-docs.atlassian.net/wiki/spaces/ZP/pages/2174287907/Attitude+Manager+Winter+2023+Plan#%5CuD83D%5CuDDD3-Timeline-(Task-1)

Telemetry Manager (aadi)

• CV side of RFD driver merged in WARG common, new repo that contains common code… same driver for air and ground side.

• Having sync tomorrow

• LOS_Comms: got interrupts working, need to follow los interface pattern.

  • Plan to finish writing and testing tomorrow

LOS

Interface

• LOS POS (Mostafa)

  • got bmx160 working on L5

  • couldn’t get sensor fusion to work

    • send message to anni to talk about possible issues

• LOS Link

  • Configurations need to be re-added.

• LOS Actuators

  • PWM did output, since the clock freq changed to 110Mhz it messed up timing.

    • Will add runtime calculations to make sure the timing is correct no matter the configuration (clock freq, prescaler, period)

• LOS Telem/comms (aadi, yuchen, hailey, alex)

  • Look at Telemetry Manager Update

• Logging?

  • LOS_LOG has not started… driver is still in prototype repo and needs to be ported to L5DARWIN HA

Drivers (lets try and get names added soon)

• VN-300 (Tony)

  • Haven’t started testing yet

  • Stanley was testing by just sending UART commands over using the VN software

    was not working when sending commands using the stm32

    Last known thing was that it wasn’t working with L5.

  • Able to try UART to VN to and from ardunio

    • next step is to test with L5 nucleo, new project, pure UART stream

• Neo M.8 (Ayoung, Hardy)

  • Started with shell code, planning on grinding some this week

  • Through the GUI, GPS is having a hard time connecting to satellite

• airspeed (Hardy, Ayoung)

  • To be tested via a car and ported to LOS drivers

• SD Card (Darwin)

  • port to L5

• Mavlink? ()Tony/Alex

  • discussed in meeting

• RFD900? (Los Telem/Comms team)

  • Aadi is currently testing using python script

• Jetson? (Los Telem/Comms team)

  • same driver, discussed in meeting

• Current/Voltage Sense (Aryan)

  • currently setting up ADC driver that can be converted to current and voltage sensor

Systems Tooling & Infra

Infra + Devops

• team don’t exist, aadi doing some when he needs it

• let us know if you are interested in working in this

Simulator (SIL) (Mostafa, Alex, Taim, ???)

• no update unforunately

• need to draft email to aiden’s prof

HIL (Hardware In the Loop) Controller (Yuchen, Mahir)

• scope document: HIL Controller version 0.1.x

• Will warp wraping up the code and start testing

• Will try to finish before feb 4th

• will discuss discussing with sahil about the impl

• Not in the call due to a call with sahil

Tracking Antenna

• no one working on it rn, maybe kevin still?

One thread Wonder for comp???????

• WHOLE NEW REPO FOR COMP

List of Open Tasks

• optical flow sensor

• Bidir DShot

• SD Card Logging driver

• USB Logging

• Tracking Antenna?

• LOS Link with CRSF SBUS

• Add IOC configuration on Main ZP

• LOS_LOG