Meeting recording

(posted after meeting)

🖥 PR’s and Reviews

Pls look at PM PR - https://github.com/UWARG/ZeroPilot-SW-3/pull/25

Yuchen Lin to put in PPM output stuff

Alex Yang to put in PPM output Driver

Stanley Tang to put in MAVLink stuff

Hardy Yu Ayoung Eun to put in NEO M.8 Stuff

Aaditya Chaudhary to put TM stuff (if ready)

Post-Meeting Micro-Arch/Timeline Reviews Today:

• Tracking Antenna (Egor, Rahul, Yuchen)

• Any other driers?

• none as of right now

😅 STUCK!

✈ Priorities & Action Items:

fill out team roster here: https://docs.google.com/forms/d/e/1FAIpQLSfGBfnTPGSR_PkMcl-XrxltoGhgfnDmErNO390fO0g0ecRPwg/viewform
you must complete the training to work onsite. Deadline is Jan 31

← Quick Asana Tour w/Anni →

← Brief Update from Chris on how we should handle handles w/LOS drivers →

← assigning new tasks to bootcampers, end of the EFS meeting if we have time, otherwise right after the CV meeting ← schedule for this weekend →

🍍 Updates this week!

(We moved to asana)

ZeroPilot 3

Jetson-ZP-Ardupilot Integration (Stanley, Alex, Navya, Ayoung)

• needs mavlink messages to be defined

  • have been defined, will be implemented

• Stanley & Alex working on driver in LOS

  • Stanley Mavlink

    • new los_mav interface

  • Alex PPM Output, Controller decoding

• Ayoung to handle in-person testing

  • MAVLink & PPM

• Navya handling decoding & re-encoding of Airside CV commands from Jetson

• Gordon working on RC to PX commands using LOS_Mav

• Alex working on creating PPM interface & output driver w/ control handover logic.

• Stanley working on mavlink driver.

  • Created prototype driver that can send/receive heartbeats between ZP and AP. Needs to be tested.

  • Created test branch on ZP (probably need to move this to the comp repo actually)

    • https://github.com/UWARG/ZeroPilot-SW-3/tree/testing/LOS_Mav

  • Need to add more functions such as setting different flight modes, take off, arm/disarm, etc

• Integration timeline for:

  • testing ppm: as soon as we get the px6 setup

  • testing ppm / ap handoff

  • testing auto takeoff/landing w/mavlink commands: as soon as ppm verified

  • testing groundstation command sequencing & autonomous flight: Feb 11/12, as soon as IMACS verified.

• Mission Commands — Plane documentation (ardupilot.org)

System Manager (Gordon, Stanley)

• Gordon: Pared down code for comp, set up code framework for RC to PX controls

  • Looking for LOS_D_MAV interface documentation (what functions can I use and how)

  • Groundside and Jetson sound not yet ready, so TM ↔︎ SM comms not in yet

Path Manager (Neha, Liang)

• Synced with Liang → will start waypoint following implementation

• Opened PR for PM Landing/Takeoff + comms with SM implementation (Pls review so i can finally have some happiness)

Attitude Manager (Ishman, Armaan)

• Built using docker, but need help building via IDE to be able to use debugger

Telemetry Manager (aadi)

• CV side of RFD driver merged in WARG common, new repo that contains common code… same driver for air and ground side.

• Having sync tomorrow

• LOS_Comms: got interrupts working, need to follow los interface pattern.

  • Plan to finish writing and testing tomorrow

LOS

Interface

• LOS POS (Mostafa)

  • BMX160 working with SF on a thread (needs the other sensors to fully work)

    • Freq set to 800 hz (need to double check on a scope)

  • Began integrating GPS into LOS Pos (Hardy & Ayoung)

• LOS Link

  • No update, merged.

• LOS Actuators

  • DSHOT still running into DMA freeRTOS issue, same as Aadi.

• LOS Telem/comms (aadi, yuchen, hailey, alex)

  • Look at Telemetry Manager Update

• LOS_Log + LOS_Storage (Darwin 😞 )

  • Architecture of Log + Storage was sketched out after last tuesday meeting

  • Nothing since then

  • Formalize diagram then starting on coding. End of Feb timeline still appropriate.

Drivers (lets try and get names added soon)

• VN-300 (Tony)

  • Barebones L5 project able to receiving expected uart messages from VN

  • VN does not seem to be responding to input from L5?

• Neo M.8 (Ayoung, Hardy)

  • LOS_Driver testing, run into assembly infinite loop when trying to create the object in SMOperationTask()?

• airspeed (Hardy, Ayoung)

  • Airspeed driver tested on Saturday, the calculated airspeed varies from 2 to 3 times larger than the car’s speed. Need to fix the math again…

• SD Card (Darwin)

  • LOS_Storage & LOS_Logging Design + Impl.

• Mavlink? (Tony/Alex)

  • See Zp ardu integration section

• RFD900? (Los Telem/Comms team)

  • See Telemetry manager section

• Jetson? (Los Telem/Comms team)

  • See Telemetry manager section

• Current/Voltage Sense (Aryan)

  • Needs testing.

• CRSF (Hailey)

  • Making progress on CRSF documentation. Should be done in the next 2-3 days.

Systems Tooling & Infra

Infra + Devops

• Derek Tang

Simulator (SIL) (Mostafa, Alex, Taim, ???)

• reached out to aidan’s prof (hopefully we can get some mentorship)

HIL (Hardware In the Loop) Controller (Yuchen, Mahir)

• Will try to finish the PPM driver by tn and figure out how to log the data

Tracking Antenna (Rahul, Egor, Yuchen)

• Microarchitecture Doc mostly complete

  • Tracking Antenna

🎡List of Open Tasks

In no particular order, most of these on asana:

• HereFlow CAN Based optical flow sensor

• Bidir DShot

• USB Logging

• LOS Link with CRSF SBUS

• Add IOC configuration on Main ZP

• Peripheral distrib. For L5 & ZP3 COMP spec.

• MPU 6050 Support

• Old Analog Airspeed Sensor Support

• US100 Rangefinder Support.

• Lidar rangefinder support (unspecced as of now)

• Instrument Based Vision Denied Landing

• Vision Based Auto-Land

• Gimbal Stabilization Software

• Phased array beamforming antennas (please don’t do this unless you’re really really sure of what you’re doing and can prove it in matlab & simulation & are capable of fronting some $)

• LOS_Xbee driver

• Custom ELRS receiver

• Custom HD0 receivers

• Firmware for BLDC motor controller

• Battery/flight time estimator (again, don’t take this unless you really know what you’re doing).

• Obstacle avoidance?

Bootcamper Assigns

Nehemiah → firmware for BLDC motor (eval kit?)

Sava → airspeed

Vishal → mpu6050

Alyzen → Xbees