Competition | 2023-2024 Aerial Evolution of Canada Student Competition | ||||||
|---|---|---|---|---|---|---|---|
Team | Waterloo Aerial Robotics Group | ||||||
Technical Director | |||||||
Version | Document Version
| ||||||
On this page |
|
...
Min | Recc/Avg | Max | |
|---|---|---|---|
Propeller Diameter (in) | 20 | 22 | 24 |
Battery Voltage (v) | 36 | - | 50.4 |
Takeoff Weight | 4.5 | < | 8 |
Thrust (kg) | ~16 | ||
Flight time (min) | 30 | TBD (40?) | |
Wind Lim. (kt) | < 20 | TBD (< 60) | |
Altitude (m) | < 120 | 200 | |
Horizontal Pos Accuracy (cm) | +/- 2 | +/-30 | +/- 200 |
Vertical Pos Accuracy (cm) | +/- 2 | +/- 15 | +/- 30 |
Usable Range (km) | 1 | 10 | inf w/LTE |
Airframe
...
Pegasus is an X-frame configuration and motor arms attached directly to a straight aluminum block. Here are some of the key notes:
...
Motors are mounted on 3d printed mounts with a <pattern> (insert a photo if you can).
Propulsion
...
Pegasus uses 4 T-Motor Antigravity MN6007II kv160 motors. These motors are designed to run on 12s voltage and are wired to APD 120F3[x] v2 ESCs. The ESC’s are significantly overspecced and are designed to allow for continuous operation in high ambient heat environments and minimal passive cooling, although this is not a recommended mode of operation.
...
| Expand | ||
|---|---|---|
| ||
|
| Expand | ||
|---|---|---|
| ||
|
...