Daniel Puratich Yuchen Lin Hardy Yu

https://uwarg-docs.atlassian.net/wiki/spaces/FT/pages/2357460993?atlOrigin=eyJpIjoiODZjNGRlNzhhOWZmNGM3NWI3MDJjMzc4NTM0YWM5NzIiLCJwIjoiYyJ9

• CV camera temporarily fixed

• Got 900 pictures!!! :pog:

Anthony Luo Daniel Puratich

Registration Complted

Next deadline is phase one paper

Conall Kingshott Nathan Green Jonathan Di Giorgio

When the drone legs were put back on, we had significant issues with insufficient slack.

• Part of it is wires wre through the wrong holes, but the wires are very tight

• it makes assembling and disassembling the

Mena Azab is working on this from an EE perspective, looking to make wires from ESCs to MT30s longer

Image Added

Connectors were also getting pressed into by bolts. Should be relieved by the above

Alison Thompson Evan Janakievski Georgia Vachon Westerlund

We’re going to be reusing old layups we already had for the floors and side panels

Did front and back panels Sunday

Shout out to whoever wrote this, I appreciate you

I am going to send DXFs to be cut on router to Graeme and find out where to leave layups to be cut

Andy Zhang Conall Kingshott Alison Thompson

CA Glue ordered to help with fraying edges