Page Comparison

Arjun Mandair Conall Kingshott Nathan Green

Currently working on mounting electrical components

Reminder if anything has changed on EE side to update: Tracking Antenna Mechanical Tasks and Electrical Components

Currently using the following servos:

• PitchYaw: https://www.servocity.com/2000hs-series-dual785hb-mode-servo-25-2/

• Image Added

  • Will need a second pitch yaw servo since current pitch yaw servo gearbox is discontinued on ServoCity

  • Options:

    • We could use a Servo Hub with Servos: https://www.servocity.com/servo-hubs/

      • Conall Kingshott Mentioned balancing issues in the Discord today?

    • Image Added

    • We could use a gearbox:

      Will possibly need a programmer for continuous:

      https://www.servocity.com/

      3102-series-dual-mode-

      servo-

      programmer-1-1/

      gearboxes/

  • Image Added

    • Not sure which servo to choose. Depends on decision: https://www.servocity.com/servos-accessories/

  Yaw

  • • • May Need a programmer depending on decision as well: https://www.servocity.com/3102-series-dual-mode-servo-programmer-1-1/

• Pitch: https://www.servocity.com/hs-785hb2000-series-dual-mode-servo-25-2/

• Image Added

  • Will possibly need a programmer for continuous: https://www.servocity.com/3102-series-dual-mode-servo-programmer-1-1/

  • Will May need a continuous with current pitch servo: https://geargenerator.com/#200,200,100,6,0,0,0,2,1,16,0.8,20,14.5,0,0,0,0,0,0,0,46,2.3,20,14.5,0,0,0,0,0,0,1,3,334

    • What angle range should we plan for?

    • Currently approximately 110 degrees.

  • Alternative: https://www.servocity.com/2000-series-5-turn-dual-mode-servo-25-2-torque/