Last Flight Test

• Comp sim 1 went well

  • Didn’t crash

  • Completed 1.5 laps on old batteries

  • RFD900 worked, LTE dropouts were still present

Next Flight Test

• This Saturday, March 30th

• Testing new LTE system with phone instead of Raspberry Pi

• Testing new batteries

Upcoming Team Events

Smile Khatri

• Paintball at 7pm on April 5th (Friday next week), this is different from the announcement in discord as it was rescheduled. React in #announcements if you are interested.

Last work session

Smile Khatri

• Finished machining the last arm connector

• Houston 3/4 finished. Need to fix/possibly remake one of the landing gear legs

• Most of the jigs were machined. Need to remake some brackets and drill holes on a couple of tubes

Next Work Session

Smile Khatri

• We will be doing layups for the new cabin on Friday, this is not a formal work session but you are welcome to stop by. Likely around 2pm

Other Annoucements

Smile Khatri

• Competition Interest Form: If you are interested in going to competition, please fill this out as soon as possible - CLOSES ON MONDAY, MARCH 31 https://forms.gle/1RKeZdagaXZSUgN29

• Planning to assemble the new cabin on the 6th/7th of April

• Cut CF tubes for Pegasus 2 prior to exams (April 8-11th)

• The goal is to have Pegasus 2 mechanically assembled before exams and handed off to EE to wire

Electronics Cases

Nathan Green

• Gemini case first revision is complete and will be printed/tested

Antenna Tracker

Arjun Mandair

• Made Purchase request for yaw servo sheet metal. Will order once approved.

• Justin Liu finished up the drawings. To me they seem fine, however, I would like a second opinion

  • All we really need is the dimensioning for the countersinks

• Sohee Yoon has been working on the AKK mount

  • To be honest, I have no idea how to review this design. Look’s very cool, but I’m not too sure about tolerancing and 3D printing.

• I also believe somebody is working on the small box? How’s the progress on that?

Frame

• Arm connectors have been CNCd. Need to mill out holes on the tube portion and tap them

• Landing gear prototype and jig to be machined tomorrow

Cabin

Evan Janakievski Sohee Yoon

Close to final iteration of the cabin. Been working on organizing and simplifying the designs.

Waiting on door hinge design from Divit Gawri

Otherwise, other items are ready for review.

Update on seats? -Nathan

New Tasks