Last Flight Test

@Nathan Green

• Comp sim 1 went well

  • Didn’t crash

  • Completed 1.5 laps on old batteries

  • RFD900 worked, LTE dropouts were still present

Next Flight Test

@Nathan Green

• This Saturday, March 30th

• Testing new LTE system with phone instead of Raspberry Pi

• Testing new batteries

Upcoming Team Events

@Smile Khatri

• Paintball at 7pm on April 5th (Friday next week), this is different from the announcement in discord as it was rescheduled. React in #announcements if you are interested.

Last work session

@Smile Khatri

• Finished machining the last arm connector

• Houston 3/4 finished. Need to fix/possibly remake one of the landing gear legs

• Most of the jigs were machined. Need to remake some brackets and drill holes on a couple of tubes

Next Work Session

@Smile Khatri

• We will be doing layups for the new cabin on Friday, this is not a formal work session but you are welcome to stop by. Likely around 2pm

Other Annoucements

@Smile Khatri

• Competition Interest Form: If you are interested in going to competition, please fill this out as soon as possible - CLOSES ON MONDAY, MARCH 31 https://forms.gle/1RKeZdagaXZSUgN29

• Planning to assemble the new cabin on the 6th/7th of April

• Cut CF tubes for Pegasus 2 prior to exams (April 8-11th)

• The goal is to have Pegasus 2 mechanically assembled before exams and handed off to EE to wire

Electronics Cases

@Nathan Green

• Gemini case first revision is complete and will be printed/tested

Antenna Tracker

@Arjun Mandair

• Made Purchase request for yaw servo sheet metal. Will order once approved.

• @Justin Liu finished up the drawings. To me they seem fine, however, I would like a second opinion

  • All we really need is the dimensioning for the countersinks

Open

Baseplate

Open

Bent Mounts

• @Sohee Yoon has been working on the AKK mount

  • To be honest, I have no idea how to review this design. Look’s very cool, but I’m not too sure about tolerancing and 3D printing.

• I also believe somebody is working on the small box? How’s the progress on that?

Frame

• Arm connectors have been CNCd. Need to mill out holes on the tube portion and tap them

• Landing gear prototype and jig to be machined tomorrow

Cabin

@Evan Janakievski @Sohee Yoon

Close to final iteration of the cabin. Been working on organizing and simplifying the designs.

Waiting on door hinge design from @Divit Gawri

Otherwise, other items are ready for review.

Update on seats? -Nathan

• Sohee and Evan cut down most of the curves on the seats to make it a simpler extrusion. We can simplify it more if needed.

New Tasks