...
Can be found in COMP2024 → Electronics Mounts → Camera
M3 holes connect to the corners of a 30 x 30 grid
Top camera will be facing forward, bottom camera will be facing down
The bottom extrusion are intentionally designed to be longer as the camera faces downward and there needs to be clearance for the cable to be connected
...
Author: Nathaniel Li Date:
Revision 1
...
Can be found in COMP2024 → Electronics Mounts → Camera
Change was made to work around the battery shroud that would otherwise block the front facing camera that was placed on top
The main concept is still the same (using the diagonal 30 x 30 M3 holes) with the only change being extended legs on the bottom and 2 additional M2 holes for the front facing camera
An additional 10mm was left between the two cameras so that the bottom facing one has enough clearance for the cable