Hardware

Mechanical

See product datasheets.

Do not mount on something it can short out to. Do not mount with zip ties that may rub against the PCB and its components. Product datasheet:

When mounting the RPI 5 (or any RPI) on Houston, ensure that:

Spacers are added between the bottom of the RPI and the metal plate to prevent components from shorting and rubbing against the metal plate
- 2x regular M2 nuts can be stacked on top of each other to create this space
- can also add yellow double sided sealant tape to create this space
M2 screws are used to secure the RPI
Nylon lock nuts are used to fasten down the RPI so that the RPI does not come loose during flight

Power Supply: 5V/5A, 5V/3A limits peripherals to 600mA.

...