Page Comparison

...

• Andrew Chai

• Ryan Scomazzon

• Meghan Dang

• Jerry Tian

• Shawn Yang

• Sam Zhang

Pre-worksesh Knowledge

We will be doing hands-on bringup of boards using stencils, solder paste, and toaster/reflow ovens. If you do not have experience with this, it is highly recommended to watch these videos to get an understanding of what we’ll be doing in this session!

...

https://www.youtube.com/watch?v=uXvXwzQf1gU&t=3s&pp=ygUcaG93IHRvIHVzZSBhIHN0ZW5jaWwgZm9yIHBjYg%3D%3D

Worksesh Goals

• bring Bring up boards

  • dependent on which parts are available

  • Other boards that can be assembled

    • Michael’s Buck: 24V - 12V or 5V

    • Nolan’s Tracking Antennae PCB

  • can bring up https://uwarg-docs.atlassian.net/wiki/spaces/EL/pages/2524119043/ESC+CAN+Adapter?search_id=d3369ba8-3b34-482a-8f51-647b07b8a8c9&additional_analytics=queryHash---bca0ab786d430883b96573ca22ca8a250bbdaa2f7c81362835438cd451f0225d or https://uwarg-docs.atlassian.net/wiki/spaces/EL/pages/2596929559/6S+Servo+Module?search_id=cac56566-60b4-4b6d-b1de-57ef648fdca7&additional_analytics=queryHash---a1b9eebe059954c4d3b8ef6c5d88f9787c1b8b42376f0da9b25faed8cdbc4138 if can circuit components come in

• Provide a valuable learning experience for new members on board bring up + validation

• Get boards assembled (and validated if time permits??)

• Allow PMs (Andrew & Meghan) to get a good idea of how sessions are run + possible improvements for subsequent meetings (things that go well & things that can be changed)

• CAN boards

  • ESC CAN adapter is the only one with all components

  • Boards + components for 5 people to bring-up

  • Will be using Toaster oven for this work session

• Bring up Tracking Antenna

  • should have all components, will have to gather them though

  • High priority + requires delicate handling (only 2 boards)

    • Ideally done with at least one experienced member

• Possibly validate ESC CAN adapter

  • continuity

  • shorts

  • tomb-stoned components

• Assign boards/projects to sub-team members (ideally one board to be brought up per member)

  • Some boards that are still waiting to be assembled (not part of F24 Order):

    • Michael’s Buck (24V to 12V or 5V)

    • Nolan’s Tracking Antennae

  Build up the knowledge for this term’s sub-team members & PMs to be able to work effectively and diligently in work sessions without too much required supervision from leads (allow PMs to run these almost independently for future sessions)

Board bringup priority:

• anything with canCAN

• ESC CAN adapter will likely be easier to assemble (1 sided, few components)

• comp critical

  • motor mount LED boards

    • should be done ASAP

...