Page Comparison

Attendance

• Georgia Vachon Westerlund

• Nathan Green

• Megan Spee

• Smile Khatri

• Sohee Yoon

• Ryan Scomazzon

• Hardy Yu

• Daniel Puratich

• Andy Meng

• Alison Thompson

• Meghan Dang

• Kevin Li

Airframe

• Almost ready for design review. Flushing out the final features and integrating with the fuselage.

• Will be ordering parts to manufacture soon.

• Motor mount redesign in progress and finalizing location of sensors/batteries

  • need to be sure we get the correct type of motor for mounting

...

Landing gear

• Making Considering to make the landing gear steerable so it does not veer off the runway at low speeds Will add

  • Adding a steerable

  tail

  • rear wheel will be easiest for

  easiest implementation

  • implementation

  • Thoughts on making a plane w/o steerable wheel first and then seeing if we need a steerable one?

    • lock in steerable wheel, could use the same servo for the rudder and the wheel.

    • 6S servo module also has an extra servo channel for this

Wings

• Fixed up the rib design and currently still running through the FEAs for the ribs

• Waiting for the ordered parts to come in so that we can test out the installation process of the wings

• Still need to CAD stoppers to prevent the wings from slipping off the spar (e.g., cap and end stop)

• Aileron CAD is a WIP; linkage is also going to be developed

• Need to source an iron (CSA approved) for applying monokote/ultracote, thinking of a small travel sized one

...

• General design of the shape is finished and currently we have members working on the individual cutout panels

  • Still need to determine how we’ll attach the fuselage to the plane

Empennage

• Thushanth working on this rn. Plan is to make the H.S. and V.S. tapered to save some weight.

• 3D printed leading edges similar to the wing.

• Mounting mechanisms wip

...

Timeline

• Reasonable Deliverable Goals for this program?

  • Finished fixed wing by end of term is POR

Electronics

• Status of hardware and firmware for this program

• The below boards should be included

  • 6S servo module

    • would be worth rolling out an updated rev if we can to fix a minor issue

  • Single Servo Driver

    • should be goo

  • 6S power module

    • highest

  • CAN Integration 2025

• https://uwarg-docs.atlassian.net/wiki/spaces/ARCHS22/pages/2556133415/Fixed+Wing+2025?search_id=41ecd2e3-f95d-413a-8174-9259597f914a&additional_analytics=queryHash---992a93455c71fedd36ac9bbc439952c041cf61445958472af479269b8d873513

  • reviewed electronics POR

• the weight of all the electronics not accounted for so far is probably around 1kg, should be within margin

• can remove one battery

• ESC

  • Ryan Scomazzon to come back to us with what he wants to use