Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Introduction

...

  1. Water Controller Rev 1 - assembly this term

  2. Programming Adapter for EFS - to be assembled in parallel with Water Controller

  3. LED controller rev 4 - assembly this next term (question) likely pushed

  4. Tracking Antenna Rev 2

  5. Unified VTX (question)

  6. Water Controller Rev 2 (question)

...

  • Yaw and Pitch tracking are both working

  • Currently working when TA is manually placed to face north (Yaw 0 degrees is north)

  • Otherwise, there is a calibration issue, will be looked over today

  • Ready for flight test on Nov 23rd

CAN Servo Driver

  • Hardy Yu tried push harder on this project and we have a member who is able to work on it recently

  • The goal is finish the firmware entirely by the end of the week

  • If the firmware is not finished by the end, Hardy will take over and finish it

CAN LED

  • Same as last week

  • We talked in the EFS meeting this week, the PM said they aim to get the CAN interface done by the end of the term

  • The design of using the center LED to control the surrounding LED will happen next term

Mech

  • Payloads on track - waiting for filament

  • angled landing gear coming on Saturday

...

  • Settings were found at Wednesday’s worksession

    • Used ExposureTime:36, AnalogueGain:16, Brightness:0

...

  • Thursday’s worksessionwork

  • session, not enough time to properly test, team members needed help with their tasks

    • Set to take pictures at different ExposureTime values, need to see which value makes the most sense to use

  • Will test a bit more on Friday, hopefully there is some sun to test in, otherwise will test in cloudy weather and see how it turns out.

...