Page Comparison

Drivers

• Sensor Fusion - Polly Liu & Liam Suter

  • prototyping with bmx160

  • Code tested and functioning on arduino

    • Need to calibrate the sensor as it’s not giving reasonable data currentlyCalibrating sensor today in the bay (hopefully can get gyro and accel readings in order. I still don’t fully understand how to calibrate the magnetometer though)

    • Starting code for the IMU on the STM32 in the meantime

• GPS

  • new task opening?

• CRSF Driver - Uzayr Hussaini

Telemetry Manager Yarema Dzulynsky

• No update: Waiting for new arch M1 to complete for porting M2 TM.

Path Manager Ayoung Eun

• Ideation Code We’ve constructed simple landing/takeoff functions . Can we schedule a meeting in near future to go through these and sketch out what we are missing and what we need to improve on? I set up a lettucemeet in the path manager channel.and got it reviewed with Hardy Yu

• we will have to figure out what part of the code we’ll be interfacing with System Manager

Infrastructure

Core Dump Kabir Verma

• Got the stack trace on a general project

ZP Validation Image Ethan Leung

• Tried to do more testing but I can’t get the zp3 board to respond, need help.

ZP3.5 M2 Bring-Up

• Stalled

Drivers Ethan Leung

• Message Queue Dami Peng

  • Made PR for abstract interface. Boardfile interface is also finished. Will likely start implementation after finals?

• Motor Channel (PWM) Bill Lu

  • Bill has sent me some updates on his interface and implementation, I will take a look later

• RC Receiver Chandise Anderson

  • Finished interface, but had issues trying to push to my branch. I will start working on implementation this week and will ask if I have any issues about itfinished the interface and I am working on fixing the notes for the pr, I will make an

• Watchdog Ronald You

  • basically ready for pr

  • need to review some minor details

Attitude Manager Sam Zhang

• No updates, just waiting for the finalized interface between drivers for the PWM motor function and the queue.

System Manager Manasva Katyal

• Implementation ongoing… Raiyan Samin Sreya Roy Chowdhury to give further updates

• Failsafe Raiyan Samin

  • Waiting for pr to be checked

ESC (Jeffery Zhen)

• CAN-ESC adapter DShot output is now working with motor attached

• To Do:

  • look at the efs-canard code that was shared recently and integrate with CAN-ESC adapter

  • make a new copy of CAN-ESC code for future PR

Servo Tharun Ganeshram Fion Lin Herman Gahra

• Larry Pan Code for the Rx queue implementation is done, will move on to testing next. Rx Queue to Shorten ISR

• System testing is done with a single servo driver!

• Looking for user-end documentation to be done

• The code still needs to be cleaned up

• Needs someone to facilitate the dynamic node allocation

Sensor Cluster Roni Kant

• Tochi Okoro Dev board is lost .. :( Need to decide if we are going to buy another sensor or just wait for the EE board to be done. Until then, working on turning driver into a cpp class.

• Henry Wu Yutong Zhu Sensor driver is basically done. Meeting with Roni Kant soon to work on integration with DroneCAN

• Aidan Fisher Logic flow written for UHD mode, finishing coding it

• Ria Prakash Moving to GPS driver task for now, so this task is put on hold

• Roni Kant Worked with CAN people on porting to l4Everyone was pretty busy with projects and exam prep, finished testing the CAN l4 port that we’ll be using. Going to meet with Henry this week to start

LED Board Folarin Fatola (Unlicensed)

• Worked on debugging the CAN integration code

• TODO: Enable one lighting board node to act as a master for the rest of the lighting boards

6s Power Module Bryan Ma Harry Chen

• We created a Confluence page for this task: 6S Power Module

  • This doc condensed most of what we know and don’t know about the project, so it was super helpful

  • Eventually, we would need to know more about the project specifics from the EE team, including:

    • How the MCU will receive voltage and current information from the battery monitoring circuits

    • What MCU ports to use

  The Google Slide on CAN would be pretty useful to reference later on, but right now more help on CAN would be helpful - there are still no tutorials to follow, so we are still scratching our heads for the most part.read the datasheet for the battery monitoring chips, and

CAN Baud Rate Auto Sensing