2024-11-27 EFS Meeting

• EFS will hire a coop student next term; the job will be posted and processed on Waterloo Works

• This is the last meeting of the term! Good luck to everyone on final exams!

Drivers

• Sensor Fusion - Polly Liu & Liam Suter

  • prototyping with bmx160

  • Code tested and functioning on arduino

    • Calibrating sensor today in the bay (hopefully can get gyro and accel readings in order. I still don’t fully understand how to calibrate the magnetometer though)

    • Starting code for the IMU on the STM32 in the meantime

• GPS

  • new task opening?

• CRSF Driver - Uzayr Hussaini

Telemetry Manager Yarema Dzulynsky

• No update: Waiting for new arch M1 to complete for porting M2 TM.

Path Manager Ayoung Eun

• Ideation Code We’ve constructed simple landing/takeoff functions and got it reviewed with Hardy Yu

• we will have to figure out what part of the code we’ll be interfacing with System Manager

Infrastructure

Core Dump Kabir Verma

• Got the stack trace on a general project

ZP Validation Image Ethan Leung

• Tried to do more testing but I can’t get the zp3 board to respond, need help.

ZP3.5 M2 Bring-Up

• Stalled

Drivers Ethan Leung

• Message Queue Dami Peng

  • Made PR for abstract interface. Boardfile interface is also finished. Will likely start implementation after finals?

• Motor Channel (PWM) Bill Lu

  • Bill has sent me some updates on his interface and implementation, I will take a look later

• RC Receiver Chandise Anderson

  • finished the interface and I am working on fixing the notes for the pr, I will make an

• Watchdog Ronald You

  • basically ready for pr

  • need to review some minor details

Attitude Manager Sam Zhang

• No updates, just waiting for the finalized interface between drivers for the PWM motor function and the queue.

System Manager Manasva Katyal

• Implementation ongoing… Raiyan Samin Sreya Roy Chowdhury to give further updates

• Failsafe Raiyan Samin

  • Waiting for pr to be checked

ESC (Jeffery Zhen)

• CAN-ESC adapter DShot output is now working with motor attached

• To Do:

  • look at the efs-canard code that was shared recently and integrate with CAN-ESC adapter

  • make a new copy of CAN-ESC code for future PR

Servo Tharun Ganeshram Fion Lin Herman Gahra

• Larry Pan Code for the Rx queue implementation is done, will move on to testing next. Rx Queue to Shorten ISR

• System testing is done with a single servo driver!

• Looking for user-end documentation to be done

• The code still needs to be cleaned up

• Needs someone to facilitate the dynamic node allocation

Sensor Cluster Roni Kant

• Everyone was pretty busy with projects and exam prep, finished testing the CAN l4 port that we’ll be using. Going to meet with Henry this week to start

LED Board Folarin Fatola (Unlicensed)

• Worked on debugging the CAN integration code

• TODO: Enable one lighting board node to act as a master for the rest of the lighting boards

6s Power Module Bryan Ma Harry Chen

• We read the datasheet for the battery monitoring chips, and

CAN Baud Rate Auto Sensing

Tracking Antenna Omer Sajid Jeremy Zheng

• Worked on it today. Yaw works relatively well. Pitch is still being worked on. Tracking Antenna really well in the simulation though. Yaw should be ready for this weekends flight test.

• Going tomorrow again to work on it along with Jeremy Zheng and Roni Kant

CAN LED Board Anthony Luo

https://github.com/UWARG/efs-can-lighting/pull/11