...
Constraints | Written By | Append Date |
|---|---|---|
1 FPV camera faces forward and 1 faces downwards | March 19, 2024 | |
Mount fixes to the existing X-frame carbon fiber plate (30 x 30 grid or cheese holes) | March 19, 2024 | |
Needs to be more robust to reduce vibrations in camera feed | May 5, 2024 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Subteam collaborating with | @ of contact | what is the contact responsible for? |
...
Can be found in COMP2024 → Electronics Mounts → Camera
M3 holes connect to the corners of a 30 x 30 grid
Top camera will be facing forward, bottom camera will be facing down
The bottom extrusion are intentionally designed to be longer as the camera faces downward and there needs to be clearance for the cable to be connected
Author: Nathaniel Li Date:
Revision 1
...
...
Can be found in COMP2024 → Electronics Mounts → Camera
Change was made to work around the battery shroud that would otherwise block the front facing camera that was placed on top
The main concept is still the same (using the diagonal 30 x 30 M3 holes) with the only change being extended legs on the bottom and 2 additional M2 holes for the front facing camera
An additional 10mm was left between the two cameras so that the bottom facing one has enough clearance for the cable
Author: Nathaniel Li Date:
Revision 2 - Strengthening
...
Can be found in COMP2024 → Electronics Mounts → Camera
Doubled wall thickness from 2mm to 4mm
Added gussets to corners
Added a beam between top and bottom facing cameras (not sure how effective this is at strengthening)
Overall, much chunkier now which should be a lot stronger, open to any ideas or changes as this was quickly done