Next Flight Test

Smile Khatri

• Houston flight test on Saturday

• 2024-11-16 Houston Flight Test - Flight Tests - WARG

Next Work Session

Alison Thompson

• Work session this Saturday

Other Announcements

• at 9am

  • We

  have decided we will be competing in AEAC this year, please read conops:

  View file
  name 2025-AEAC-Competition-CONOPS-v1.0-11-September-2024.docx.pdf

  Plz fill out team roster form for this term! Mandatory for joining the team, complete this AFTER your bootcamp! We will NOT assign you any tasks, give you the bay code, or review your designs until this is done!

  • https://forms.office.com/r/ka0MJHJQ9Dwill start with machining spacers for the fixed wing frame

  • Cut CF tube for tank payload

  • Payload assembly

  • Angled landing gear assembly (likely epoxy)

  • Box tube for spars and tail boom

Comp Design

Alison Thompson

• Had a design review yesterday, both payloads will be ready for final review by Monday and we will begin manufacturing after thatBoth payloads ready for manufacturing, order has been placed for parts

• Angled landing gear looking great, final version should also be ready by Monday

• Layup last weekend failed because epoxy got poisoned.

  • Note to tell Yuchen

• 2024-11-06 Pegasus Payload & Landing Gear + Eclipse CAD review - Meetings - WARGalmost done, finalizing angle and adding stopper to account for unknown exact barrel dimensions

Eclipse (Fixed-Wing) Airframe

Evan Janakievski

Fuselage

Landing Gear

Ben Lovegrove

• Updates on manufacturing? What needs to happen this weekend?

Tracking Antenna

• • All parts dropped off at student machine shop as well as E3 machine shop

  • Spacers need to be machined as well as spars

    • Drawings for spacers need a final look over but should be fine, simple lathe task

    • Spars drawings will be completed tomorrow for review, holes were added today for gps mount

Empennage

Thushanth Parameswaran

• New servos ordered.

  • Lighter than what was planned initially. 1 servo for each side for the elevator, 1 servo for the rudder.

  • Mounted inside the stabilizers

  • The Airfoil of HS was changed to NACA0012 from 0009 since it was too small to mount the servo inside.

  • https://ca.robotshop.com/products/25kg-goteck-metal-gear-micro-servo

• Image Added

Eclipse Wings

Nathaniel Li

• Ben Lovegrove updates on cheesed spar?

• Agapa GoombsKeegan Jeewan Sam Wong aileron → PDM not working

• Keegan Jeewan pitot tube no progress → PDM

• Evan Janakievski gps mount looks great!

Image Added

• If you guys need to, feel free to work on it off-line and send Smile Khatri the CAD to add into PDM

Ground Station

Smile Khatri

• Sam Sayad Sacha Missaghian any updates on the hardware plate

• Working on it during Saturday’s work session

Peggy 2 Jig

Victor Sun Shawn Henry Dragon

• We have the plan we were just waiting for Victor Sun to get PDM working, seeing as that hasn’t happened CAD will be done these next couple days

New Task

• We are going to need new holes cut into the baseplate on either side of each battery for the jig

New tasks

Smile Khatri

Mech leadership roles

Smile Khatri

• I am stepping down as a mechanical lead at the end of next term. Please fill out the form below if you are interested in becoming a mechanical lead, or a project manager!

• Plan is for the new lead to be active next term

• Please fill it out by next mech meeting and feel free to reach out to us if you have questions about what either role entails!

• Subteam Lead Responsibilities - Administration - WARG

• Project Manager - Administration - WARG

• https://docs.google.com/forms/d/e/1FAIpQLSeOJ1WSgnRcaD1U88dHK06TOHNmZSJtxSjmqRjy2582Gvpi2g/viewform?usp=sf_link