...
Assignee | Asana Task | Date |
|---|---|---|
|
Task Progression/Updates
Author:
...
UPDATE TITLE
...
Evan Janakievski Date:
Initial Design
Designed to be inserted into spar and mounted with two fasteners.
Can be changed to be press fit in both axes, not just one. Would be just one screw instead.
GPS mounts in odd mounting pattern but will be secured using the four holes
Will be 3D printed and the GPS plate will be outside of the spar.
Author: Nathaniel Li Date:
CAD Review 1
Looks really good, approved by me
I’ve updated the both wing assemblies with it
...
Author: Evan Janakievski Date:
New update has the mount act like the spacers and the gps will be under the monokote
Discussed in discord and Nathan and Daniel are ok with not having access to it
Ensure the gps is not touched while monokote is being applied
...
GPS circular part will be taped to the tab on the spacer
Author: Nathaniel Li Date:
CAD Review 2
Saw that you accounted for the fact that we’re switching to 1/8” ribs but the length was off by a bit
I just fixed it since I already had it opened so no need to make any changes
...
Good work!