Page Comparison

...

• Must be done before the flight test (Saturday May 18th)

  • requirement somewhat dropped but target is before comp to show the judges

  • Prior to competition for 2024 system diagram ← will be changed after comp

• Is mounting on Pegasus 2 viable? Smile Khatri

  • Confirmed Yes this is the best path forward

• Which pattern would look best? Nathan Green Emma Chan

  • All White or two green and two red

When is the assembly + photoshoot?Friday May 17th at 6pm (Provided it works for Mech +EFS)

• Assembly Saturday or Sunday Smile Khatri Parker Lawrence-Valeriani

  • Bring as many people as possible

• Photoshoot Monday, (Tuesday worst case scenario) Emma Chan

What needs to be done:

MECHANICAL + ELECTRICAL

...

(ASSEMBLY SESSION)

• The boards will be connected to a 3S battery through a buck converter (Project 12V-5V @ 3A Buck Converter Board 2022 (altium.com)) dropping it to 5V

• Wires (GND & 5V) can be connected in open air (not funneled through tube) or just get an external battery

• Take pictures at night to abstract the wiring

• Disassemble

  Should follow the following schematic

Schematic Diagram

...

• Should follow the following wiring diagram

Image Removed

MECHANICAL

• Mount the controllers onto each arm on the motor mounts Smile Khatri would we be able to get some mechanical people on this

  • Wires (GND & 5V) can be connected in open air (not funneled through tube)

  • Disassemble

EFS

Adjust firmware so that the lights are stagnant for pictures Kelvin Feng Eric Su

...

Image Added

• Mounting should look like this

Image Added

EFS

Kelvin Feng Eric Su Richard Dong