...
Constraints | Written By | Append Date |
---|---|---|
Built into Nanuk 930 case | Smile | |
Fit a 6S battery or a few? | Daniel | |
supports ground station arch as outlined in the 2025 doc | Daniel | |
Use the 19” monitor that has been disassembled. It should be mounted in the top of the case as far back as possible to leave room for components on the bottom half when closed. Allow the VGA and Power cables to exit the top and enter the bottom half of the case. Make it look nice, cover the space around the monitor with polycarbonate. | Nathan Green | 2024-09-10 |
Relevant Contacts
Subteam | Contact | Contact Description |
---|---|---|
Tech dir |
| |
Exec dir |
|
Assignees
Assignee | Asana Task | Date |
---|---|---|
@ calumCalum Chisholm | link to asana task assigned | Date assigned |
Task Progression/Updates
...
Calum: @
...
UPDATE TITLE
Dimensions for Nanuk 930 Custom plate to work off of: https://www.datapro.net/help/custom_nanuk_panels.html
...
2024/07/10
Created CAD model of Nanuk 930 Case based on website dimensions. The dimensions are quite vague and this is a rough idea to work off off.
Created plates from given drawings that will attach to the bottom and top of the case with #6 X 1/2" Hi-Lo Self-Tapping Sheet Metal Screws (18pcs) per plate. The case has premade threads.
Calum: @ 2024/07/17
Would like to know the dimensions and sizing of components so I can CAD them out and arrange them
...