Not added to ASANA
Daniel/F0
[ ] Update SWD/SWO
[ ] UART Connectors are inconsistent with ZP1.0
[ ] Add I2C/SPI select resistors for Safety IMU connector
[ ] Update Schematic sheets with WARG templates
[ ] Update parameters (name etc.)
Overall
[ ] Fix Duplicate Net Names Wires
[ ] Add notes to decoupling caps → keep as close as possible
[ ] Add NO ERC to NC pins
[ ] Add calculations for schematic to google sheet
Use only Murata/Kemet caps?
H7 PartA
[] Add sensor transfer function to temp sensors
H7 Power
[ ] VDD USB
[ ] Allow for optional 5V USB Supply
[ ] Use 0Ohm resistors instead of solder bridges
NOTE: Not doing this anymore?
[ ] microSD Schematic
[ ] Update uSD connector footprint and symbol to be a bit cleaner