Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Flight Controller:

  1. Microsd card slot

    1. card must be SPI interface, around confluence requirements there may be more details

    2. something from this list prolly https://www.molex.com/molex/search/deepSearch?pQuery=category%253A%2522Memory%2BCard%2BSockets%2522%2540productname%253A%2522microSD%2BCard%2522

    3. dont do the one on ZP2 cuz the pins are the wrong way around. make sure whatever is chosen here has pins the right away around and is easy to work with!

    4. https://www.digikey.ca/en/products/detail/molex/5027740891/1952535 ?

    5. This task is marked as complete by Daniel but marked incomplete by Aidan

  2. current & voltage sense

  4. IO Connector Sourcing

  5. ZP3 Schemetic

  6. Finish FootPrints

  7. Primary Layout

  8. Primary Routing

  9. Order ZP3 Primary PCB

  10. Dev Interface Board

  11. Fuses Sourcing

  12. Flight Interface Board

  13. Arm/Disarm Connection Circuitry

  14. Arm/Disarm Board

  • No labels