Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

  • What are we working on right now (same as ones before comp)

Project

Next Steps

Notes

Pegasus 2

  • Make arm holes near the center larger and assembly it

  • Center assembly has been loctite

  • Will absolutely try my best to make more landing gears b4 comp (depends on mech team involvement and schedule)

    • plz hand off the second piece of stock to Ryan in ESMS ASAP, it will take some time for the alum to be done

    • If flying peggy 1, should switch to new landing gear on that drone, arms should be interchangable

  • Are we flying peggy 1 or 2 for comp most likely? idk what the status on wiring/when it will be ready to test

Antenna Tracker

  • Needs a spacer before this is can be software tested

  • I need to be given a run down of the tracker design rn, where the problem is and where to add the spacer - Smile Khatri

  • I CADed the spacer, just forgot to make drawing/ask for it to be made, will do after this meeting - Alison Thompson

Misc Cases

  • Gemini case is DONE LETS GOO. Sat down with the EFS leads and mounted the board yesterday.

  • What projects before comp?

    • Probably weather proofing? Is Conall still doing that Alison Thompson ? If not, we can assign to Jonathan or Andy if they are down, need someone who can work fast

    • Conall said he could do but will be away until at least the 17th

  • What projects after comp?

    • Really want to pursue making fixed wing. Maybe chance to test Zeropilot on the fixed wing = more projects for mech and efs?

    • I think that this should be a sims + testing project, make sims of geometry that is all halved or doubled dimensions, then fly to see how the sim values effect irl performance

    • Pegasus upgrades based on

  • What kind of support is needed?

    • any fixed wings need support of EE and EFS to get flying

  • No labels