Big Project | Project | Project Manager |
|---|---|---|
Houston | Pixhawk Mount |
Task Description
Design and manufacture a mounting solution for our flight controller on the Houston airframe.
Current Pixhawk mounting:
Right now it’s just mounted with a yellow tack
Mount on these holes:
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Mounts to pre-existing holes | 2024-06-04 | |
Light weight | 2024-06-04 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Flight test coordinator |
|
Assignees
Assignee | Asana Task | Date |
|---|---|---|
link to asana task assigned | Date assigned |
Task Progression/Updates
Author: @ Benjamin Lovegrove Date: 2024/06/24
Initial Design
Mount is designed to go in the diagonal slots in the frame on either side of the Pixhawk.
Bolt the Pixhawk by putting the bottom below the frame and top above and bolting with M3 bolts.
The top piece goes over the Pixhawk the short way in two spots, one above and below.