Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Big Project

Project

Project Manager

Houston

Pixhawk Mount

Smile Khatri

Task Description

Design and manufacture a mounting solution for our flight controller on the Houston airframe.

Current Pixhawk mounting:

pix2.jpgpix1.jpg
  • Right now it’s just mounted with a yellow tack

Mount on these holes:

pix3.jpg

Constraints

Constraints

Written By

Append Date

Mounts to pre-existing holes

Smile Khatri

2024-06-04

Light weight

Smile Khatri

2024-06-04

Relevant Contacts

Subteam

Contact

Contact Description

Flight test coordinator

Yuchen Lin

  • Will answer any hardware questions

Assignees

Assignee

Asana Task

Date

Ben Lovegrove

link to asana task assigned

Date assigned

Task Progression/Updates

Author: @ Benjamin Lovegrove Date: 2024/06/24

Initial Design

Mount is designed to go in the diagonal slots in the frame on either side of the Pixhawk.

Mount for pixhawk copy.jpg

Bolt the Pixhawk by putting the bottom below the frame and top above and bolting with M3 bolts.

The top piece goes over the Pixhawk the short way in two spots, one above and below.

  • No labels