Airframe
Almost ready for design review. Flushing out the final features and integrating with the fuselage.
Will be ordering parts to manufacture soon.
Motor mount redesign in progress and finalizing location of sensors/batteries
Landing gear
Making the landing gear steerable so it does not veer off the runway at low speeds
Will add a steerable tail wheel for easiest implementation
Wings
Fixed up the rib design and currently still running through the FEAs for the ribs
Waiting for the ordered parts to come in so that we can test out the installation process of the wings
Still need to CAD stoppers to prevent the wings from slipping off the spar (e.g., cap and end stop)
Aileron CAD is a WIP; linkage is also going to be developed
Need to source an iron (CSA approved) for applying monokote/ultracote, thinking of a small travel sized one
Fuselage
General design of the shape is finished and currently we have members working on the individual cutout panels
Still need to determine how we’ll attach the fuselage to the plane