Big Project | Project | Project Manager |
|---|---|---|
Dallas | Propeller Guards |
Task Description
Design a propeller guard for the Dallas airframe. The propellers are 10inches in diameter. The current guards are a bit fragile, and do not completely protect the propellers if the drone is flying at an angle or is trying to fly in narrow spaces.
Note: Houston and Dallas share the same CAD assembly. It can be found in PDM: "C:\WARG_CAD\Houston\HOUSTON_MAIN.SLDASM"
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Subteam collaborating with | @ of contact | what is the contact responsible for? |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
link to asana task assigned | Date assigned |
Task Progression/Updates
Author: @Jonathan Zhao Date: 2024/11/22
Adjusted Propeller Guards
Adjusted the span of the guard to cover 180 degrees. This way, the propellers would be protected when flying into corners.
Extended the length of the guard to make sure propellers are not vulnerable for drone tilting angles up to 45 degrees.
Added more material to the ends of the guard to make it more rigid and less bendy.
