Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

  • Design custom navigation lights that can be attached to a drone

  1. Surface Mount Non Addressable

  2. Handle up to 12V

  3. TBD

https://docs.google.com/spreadsheets/d/1rQ15cULHvpWA7JbSKxMaMTKfRuIcg4_okoWHp6thIQM/edit?usp=sharing

What we need: Voltage Regulator, Non-adressable LED strip, diodes

Product Features:  

  • Size 2835 diodes , 0.33” between each LED  8mm flex, cut points available every 1” (3 LEDs)  

  • Available in custom pre-cut lengths or full 12m reels  Class 2 DC plug-in connectors (3.5 x 1.3 mm) or screw terminal end connectors available  

  • Adhesive backing mounts to almost any flat surface 

  • Minimal heat production, no IR or UV output  

  • Dimmable with compatible systems  Rated to last up to 100,000 hours  CSA C22.2 No. 250.0-08/ANSI/ UL Standard 1598, 8750  

  • To be installed in accordance with NEC, using Class 2 12V DC power supply!

Product Features:  

  • Color changing 5050 RGB diodes  

  • Custom lengths or 12 meter reels  Low profile design (10 mm x 2mm)  

  • Minimal heat production- no IR or UV light  

  • Adhesive mounts to almost any flat surface  

  • European Union CE, RoHS compliant  

  • To be used with compatible 12V 4-conductor RGB products


Non Addressable SMD LED Options: 

Voltage Regulator Options:

Diode Options: 

Final Choices:

Calculations:

  • Resistors:

    • Power Supply Voltage Range: 5V

      Forward Voltage: 3.3V

      Desired LED Current: 15mA

      Resistance= (Power Supply V - Forward Voltage)/Desired LED Current

      • R=(5.5V-3V)/(15mA)=113.34 Ohms


  • March 13 2022, researching components needed for the led strip

  • March 15 2022, agreed to use option 2, calculated LED resistance and found smd resistors. Finalized part selection for the project, awaiting response from EE Leads.

  • No labels