Slicer: https://www.prusa3d.com/page/prusaslicer_424/
Suggested Material Configurations
These can be found in GrabCAD: COMP2023 → Phoenix → Configs
You can download the file and add the parts you want to print. You can also open a new Prusa project and import the configuration from this document into your current one.
ABS BENCHY SPECIFIC
Template on GrabCad: Comp 2023 → MECH → 3D Printing → ABSBenchySettings
You can download this file and replace the benchy with the part you want to print
Print Troubleshooting
If the first layer isn’t sticking:
Print with a raft
Print the first layer at a slower speed
Recalibrate it until the filament is coming out the correct amount and adhering to the build plate