\uD83D\uDDD3 Date
18/05/2023
\uD83D\uDC65 Participants
\uD83E\uDD45 Goals
Update the group on progress of various projects
Review Deadlines
Allocate tasks
\uD83D\uDDE3 Discussion topics
Time | Item | Presenter | Notes |
---|---|---|---|
Introductions | We have LOTS of new people!
| ||
Onboarding | New members, I dropped the ball on this! | ||
Updated CAD Guidelines | |||
Version Control | GrabCAD is dying 😥 Solidworks is mean about PDM | ||
Learning: What do you want? | What are you hoping to get out of the mechanical team? What skills do you want to learn? Flow simulation: Luke Johnston Thushanth Parameswaran Drone Specification (motors, props, etc) FEA | ||
Potential projects | See below |
Potential Projects
Task | Owner | Reference | Notes | Date |
---|---|---|---|---|
Antenna Tracker | Arjun Mandair Harleen | Nolan is working on this and wants hardware to test by July? Communicate with Andy Zhang Jason Li | July 15, 2023? | |
Houston Lower half redesign | We need extra space for sensors, Jetson, Pi. Landing gear will need to be redone as well for space & weight. | July, 2024? | ||
Comp 2024 Base Drone | Requirements are not ironed out, so it’s hard to say. That meeting is Tuesday. Likely either X, or H quad running a combo on the sheet below. Have “ready” for Fall term. Try to do 2 frames as close to parallel as possible. Anni has made motor selection reference! | August 31, 2023 | ||
Simulation knowledge-base | Conall knows negative amounts about SIM. | |||
Fixed Wing for EFS? | ||||
New Templates | We need new templates that load in properly, use proper units and good drafting standards. | June 15, 2023 | ||
Thrust Testing Rig | Cloudy | Requirements list incoming (Meeting w/Anni) Previous versions have been created, but we need a more “permanent” solution |
Onsites!
- Conall Kingshott Ansys licenses