Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Configuration

USART2

Basic Parameters

Don’t touch Advanced Parameters

Advanced Features

  • Enable TX/RX Inversion (SBUS is inverted UART signal)

USART is UART with Sync option, meaning you can utilize a clock as a reference frame for data.

To Do

  • Configure Nucleo pins
  • Test data with a logic analyzer and RC controller
    • Debug with interrupts
    • Transmit receive signal to nucleo to check if the data is similar

Questions

Unit Testing Logic

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.