This document is where all the materials required to assemble the 2023-2024 drone will be listed.
JST Crimps
JST-SH 1mm (Debug Ports)
JST GH 1.25 mm (Most Pixhawk connections)
JST GH 2.00mm Pitch CLIK-Mate (Power1/2 Pixhawk)
JST-ZH 1.5mm (Not really required only used for DSM RC PORT)
Power Distribution Wiring
8 AWG black and red
Amount:
(indicate length needed)
1.80/foot (20 Stock)
Links: https://www.digikey.ca/en/products/detail/dfrobot/FIT0580/9559249
1.59 USD/foot
Notes:
rated for 75A
should be stranded for flexibility
used for batteries, power module and PDB connections
look for light sheathing
XT-90 connectors
Have in the bay
Motor Wiring
14 AWG ESC wires
Amount:
~$2 USD/Meter
https://www.tme.com/ca/en/details/ul-csa-awg14-or/single-core-cable-strand/helukabel/60609/
https://www.tme.com/ca/en/details/ul-csa-awg14-br/single-core-cable-strand/helukabel/60603/
https://www.tme.com/ca/en/details/ul-csa-awg14-bk/single-core-cable-strand/helukabel/60601/
~0.6 USD/ft = 1.8 USD/Meter
14 AWG Bulk Roll Silicone Wire Priced for Per Foot - Red (buddyrc.com)
14 AWG Bulk Roll Silicone Wire Priced for Per Foot - Black (buddyrc.com)
14 AWG Bulk Roll Silicone Wire Priced for Per Foot - Yellow (buddyrc.com)
Notes:
From TME: Black, Orange, Brown. Class 5 Flexible, Stranded
From Buddy RC: Black, Red, Yellow. Silicon
Bullet Connectors
Amount:
24 male and female pairs
(insert purchasing link)
Notes:
There are 3 bullet connectors required at the motor and 3 bullet connectors required at the ESC (6 per motor side)
Either 3.5mm or 4mm
Check bay as we have many in the bay
MT-30
Amount:
need 4 male and female pairs
order 10 male and female pairs
https://www.tme.com/ca/en/details/mt30-m/dc-power-connectors/amass/
https://www.tme.com/ca/en/details/mt30-f/dc-power-connectors/amass/
MT30 3 Pole Connector for ESCs & Motors by Amass A Pair (buddyrc.com)
Notes:
Used at the end of carbon fiber tubes to plug and unplug ESC wires from motor