Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

This document is where all the materials required to assemble the 2023-2024 drone will be listed.

JST Crimps

  • Pixhawk Baseboard Ports - Holybro Docs

  • JST-SH 1mm (Debug Ports)

  • JST GH 1.25 mm (Most Pixhawk connections)

  • JST GH 2.00mm Pitch CLIK-Mate (Power1/2 Pixhawk)

  • JST-ZH 1.5mm (Not really required only used for DSM RC PORT)

Power Distribution Wiring

  • XT-90 connectors

    • Have in the bay

Motor Wiring

  • Bullet Connectors

    • Amount:

      • 24 male and female pairs

      • (insert purchasing link)

    • Notes:

      • There are 3 bullet connectors required at the motor and 3 bullet connectors required at the ESC (6 per motor side)

      • Either 3.5mm or 4mm

      • Check bay as we have many in the bay

  • No labels