Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

The LTE module is a Raspberry Pi 4 with a Waveshare 21707 LTE hat. It is used to communicate with the flight controller over mobile networks.

Big Project

Project

Project Manager

2024 Comp Drone

Electronics Mounts

Nathan Green

Task Description

A mount which securely holds the Pi with the hat and fits our 30x30mm hole pattern is needed.

Constraints

Constraints

Written By

Append Date

USB-C Port & USB-A ports on the Pi must be exposed

Nathan Green

2023/10/05

Pi is securely held in place

Nathan Green

2023/10/05

Fits 30x30mm hole pattern

Nathan Green

2023/10/05

Pi cannot touch the carbon fibre to avoid shorts

Nathan Green

2023/10/05

Prioritise light weight

Nathan Green

2023/10/05

Note that there is no requirement for the mount to fully enclose the Pi and the hat, as the top will be covered and the module operates at low voltage (5V).

Assignees

Assignee

Asana Task

Date

Wallace Lee

LTE Hat Assembly Mount

2023/10/05

  • No labels