Big Project | Project | Project Manager |
|---|---|---|
Antenna Tracker | Pitch Axis |
Task Description
Modify the Yaw-Only Antenna Tracker to have a pitch component and have the antennae mounted on the rotating pitch shaft you will create.
Constraints
To be written by the Project Manager. All constraints should be their own row of the table, if a constraint is removed it should be crossed out but left in the table. The append date is when the constraint was last updated (update this when constraints are removed!) DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Constraints | Written By | Append Date |
|---|---|---|
Must be easy to swap and remove Antenna Mounts |
| |
Must be able to rotate approximately 135 degrees (90 straight up to 45 degrees below eye-level) |
|
Relevant Contacts
To be written by the component owner and should be used if collaborating with another subteam. This should be the “component owner” of the other subteam and/or the person on those subteams. Delete if not used. DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Subteam | Contact | Contact Description |
|---|---|---|
Electrical | Providing a list of Antennae that need to be mounted on the pitch axis shaft. |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
|
Task Progression/Updates
Author: Arjun Mandair Date:
Review One
Shaft is a hex shaft to prevent sliding and rotation of the antennas
Yagi Antenna Mount consists of a 3D printed mount with a set screw
Two parts to support both orientations of the yagi antennae
Two Set screws to prevent sliding of the heavy yagi antennae
Utilizes pre-defined yagi antennae mounting holes
