Big Project | Project | Project Manager |
|---|---|---|
Antenna Tracker | Pitch Torque Calculations |
Task Description
We need to determine what servo to use for rotating the hex shaft, which defines the pitch axis. Run some calculations or simulations to determine the required torque we need, and also the required gear ratio if applicable.
Constraints
To be written by the Project Manager. All constraints should be their own row of the table, if a constraint is removed it should be crossed out but left in the table. The append date is when the constraint was last updated (update this when constraints are removed!) DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Constraints | Written By | Append Date |
|---|---|---|
Able to rotate the yagi antennae and X-AIR antenna |
|
Relevant Contacts
To be written by the component owner and should be used if collaborating with another subteam. This should be the “component owner” of the other subteam and/or the person on those subteams. Delete if not used. DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Subteam | Contact | Contact Description |
|---|---|---|
Electrical | Confirming what electrical components will be used. |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
|
Task Progression/Updates
Author: Arjun Mandair Date:
Calculations Review One
Underwent review during the Mech Meeting.
Calculations are off
Conall Kingshott Said the current servo with the current gear ratio is good
