Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Current »

Summary

As of 2024-06-05 Big Fixed Wing Architecture Sync this is merged into Fixed Wing 2025 .

Outdated Info

  • Develop small fixed wing plane!

    • Target 4kg ish?

    • Target 6S

      • high thrust to weight seems optimal bc we can get away with more mech wise?

    • Dual flight controller mount

      • support pixhawk and ZP3 mount on the CG as flight controller

    • consume the least amount of mechanical team bandwidth to create a fixed wing that is mechanically stable

      • Updated version of a foam plane

      • Buy an off the shelf thing for this?

    • it will for fixed wing pilot training with pixhawk with this to prepare for pilotting Fixed Wing 2025

  • Primary purpose

    • testing EFS milestones milestones​ M2 and M3

    • testing EE ZP3 hardware designs

  • Secondary purpose

    • provide practice with block diagrams and system engineering for EE which seems needed after last year’s lack of detail in final arch log.

  • Who

    • Meghan Dang up to run integration for EE side of ZP3HW

  • What this isn’t

    • This won’t be a learning platform for Fixed Wing 2025

    • This won’t be composites

    • It will just be a more advanced foam plane than we’ve built in the past.

      • The Twin

        • this is the foam fixed wing we’ve flown in the past to test ZP, had issues with wingspar and reliability so we’re looking to upgrade this year! Feedback on the twin design is that the wingspar broke and motor mounts were unreliable. battery mounting was the crumple zone and all components being taped were difficult.

    • it will not use to have mech validate functionality and mech knowledge

  • Next Steps as of early S24

  • No labels