Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Introduction

Captures

image-20241003-043222.png

image-20241003-043237.png

image-20241003-043358.png

Usage

  • J1

    • Power to the RPi

    • 3S LiPo (~12V) max input

  • J4 or J5

    • to pixhawk TELEM port for UART

  • J10

    • for uart killswitch

    • connect S to GND to allow UART coms

    • float S or pull to +3.3 V to disallow UART coms

  • No labels