Big Project | Project | Project Manager |
|---|---|---|
Tracking Antenna | Tracking Antenna Controller Board Mount |
Task Description
Design and 3D print a mount for the controller board that will be mounted onto the tracking antenna base plate.
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Ports must be accessible (e.g., usb port) | Oct 31, 2024 | |
Mounting holes must obey the 30.5 x 30.5 mm grid pattern | Oct 31, 2024 | |
70x70mm footprint with 30.5x30.5 mounting holes (at the corners) | Oct 31, 2024 | |
Must fit on the tracking antenna base, without interfering with any other mounts | Oct 31, 2024 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
EE Lead | any specifics about the board itself |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@ assignee | link to asana task assigned | Date assigned |
Task Progression/Updates
Author: Jack Doehler Date: 2024/11/07
Complete Design
Notes:
Assembly consists of separate top and bottom case pieces.
There should be enough room for the Seeeduino, which was not included in the STEP file I used for reference.
Overall footprint of case is 80mm x 80mm x 30mm.
