Next Flight Test

2025-02-08 is the next flight test. However, this test has a high chance of being cancelled so if you are interested keep an eye on the thread here:

https://discord.com/channels/776618956638388305/1336370633952723056

Next Work Session

Next work session will be on Saturday, Feb 8th. Sohee Yoon will be there to help out with wing manufacturing if still needed!

Other Announcements

• Bay door is broken - do not use until further notice

  • never put material under the door

  • If the door gets stuck on something, use the STOP button, do not try to remove material while door is trying to lower!

• Fill out roster for W25! You MUST do this before you will be assigned any tasks: https://forms.office.com/r/ka0MJHJQ9D

• Comp roster is out and posted in #announcements!!

  • Mech reps will be Evan and Alison, Camilo on waitlist ✈️

  • If you have concerns, let us know :)

Eclipse frame stuff

Evan Janakievski

• Wing spars finished

Eclipse Landing gear

Smile Khatri

• Waiting on rear landing gear to be waterjet

• Landing gear adapter has been received and is stored in the red tool chest

Empennage

Smile Khatri

• Epic work Rohaan

• Progress on gluing VS and HS?

Eclipse Fuselage

Sohee Yoon

• Finished! 😄

Eclipse Wings

Nathaniel Li

• Great work!Gabriel Singaraja Rohaan Vasa

• Rohaan Vasa did u try printing the aileron?

• Need to print another spacer in place of the pitot mount

Comp Payload

Alison Thompson

• Payload redesign complete, pending CAD review

• Will need to reprint the tank, plus try drilling out tube holes on polycarb to be bigger

• Alison to order another pump and more tubing

Comp Frame

Alison Thompson

• Landing gear being swapped back to straight version to save weight

Peggy 2 Landing Gear

Evan Janakievski

• In process of switching the landing gear back the the straight landing gear

  • I genuinely can’t find it, have scoured the shelves and haven’t found them

  • tubes are the same, find aluminum with prints attached and feet

• Plan to work on it Friday, but woke up sick today (thursday) so if I don’t feel better, I won’t be going in

WEEF/Eng Soc funding list

Smile Khatri

• Requesting funds from WEEF and EngSoc to procure tools and materials

• If anyone has any tools, materials, or anything they want to order for next term please let us know

• Some ideas:

  • Torque wrench with a bolt marker

  • Water jet / machining money

  • CF fabric / composites items

  • Aluminum stock

  • More 3D printing filament

  • gowns for during composites or sanding items down

  • Another powder bed sheet for printer?

    • issues with bed adhesion this term and think there was glue applied last term which has now decreased the effectiveness of the bed without glue

Final lift of WEEF and EngSoc items

• Torque Wrench and paint pen to go with it to indicate it has been torqued

  • EPAuto 1/4 Inch Drive Click Torque Wrench Set for Bike Tool (2 to 20 Nm), Hex/Torx Bit Socket Extension Bar Bicycle Maintenance Kit & Click Alert, Chrome Vanadium Steel Alloy (Cr-V), Black Finish, Torque Wrenches - Amazon Canada

  • comes with hex bits and low values for torque

• Water jet funds → explain justification in that we are now having to pay for E3

• Carbon fiber fabric → engsoc

  • composites canada not in stock, use past proposal for pricing

• aluminum stock → normal airframe manufacturing section

• gowns → not sure if it will be approved but worth it and phrase it as safety and keeping fibers off clothes

  • pricey!!

  • would need to get like 1 xs, 2 small, 1 medium as sizing is very large difference

  • Pioneer Shop & Garage Work Coat - 4 Pockets - Action Back - Snap Double Placket Closure - for Mechanics - Navy : Amazon.ca: Clothing, Shoes & Accessories

• powder bed sheet for printer

  • Bambu Textured PEI Plate | Bambu Lab CA Store

• 3D printer filament → engsoc

  • nylon cf → PA6-CF | Bambu Lab CA Store

  • aero pla → PLA Aero | Bambu Lab CA Store

  • petg hf → PETG HF | Bambu Lab CA Store

  • petg cf → PETG-CF | Bambu Lab CA Store

  • tpu for ams → TPU for AMS | Bambu Lab CA Store

• deburring tool

  • AFA Tooling - Deburring Tool with 10 Extra High Speed Steel Blades - Works on Metal, Resin, PVC, and 3D Printed Plastic Edges - Great for Copper and PVC Pipes, 3D Printing, Resin Art, and Metal Work : Amazon.ca: Industrial & Scientific

• digital calipers

• pliers - let Rohaan cook

• better allen keys (individuals)

  • ball end t handle → GEARWRENCH 7 Piece Metric T-Handle Ball End Hex Key Set - 83516 : Amazon.ca: Tools & Home Improvement

  • screwdriver type if we want second set → FLY 4pcs 1.5mm 2.0mm 2.5mm 3.0mm Hex Screw Driver Set Titanium Hexagon Screwdriver Wrench Tool Kit for Multi-Axis FPV Racing Drone RC Quadcopter Helicopter Car Models, Tool Sets - Amazon Canada

• respirators → 3M Half Facepiece Reusable Respirator 6200, Gases, Vapors, Dust, Paint, Cleaning, Grinding, Sawing, Sanding, Welding, Adjustable Headstraps, Bayonet Connection, Medium : Amazon.ca: Tools & Home Improvement
  2x 3M P100 Particulate Filters 2091, 2 Pairs : Amazon.ca: Tools & Home Improvement

• sand paper

• cf tubes → https://shop.compositescanada.com/#/product/CFPT-20X18
  https://shop.compositescanada.com/#/product/CFPT-10X9