Big Project | Project | Project Manager |
|---|---|---|
Comp 2025 | IR Camera Mount |
Task Description
Autonomy needs to use the IR camera so we’re looking to mount it onto https://uwarg-docs.atlassian.net/wiki/x/AQDloQ which has mounting holes that are ready to use.
Design a mount for the IR camera so that it uses the mounting holes and doesn’t require the use of glue or zip-ties (Ie. fasten it properly).
Here’s the link to the camera: https://www.digikey.ca/en/products/detail/raspberry-pi/SC0873/17278646
Additionally there is already a mount being used for the IR camera which you can use for inspiration, but note that it requires the IR camera to be zip-tied or glued in (not ideal).
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Mounts to the 28mm x 28mm M2.5 holes |
| |
Doesn’t interfere or block OFS |
| |
3d printed case |
|
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Subteam collaborating with | @ of contact | what is the contact responsible for? |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
link to asana task assigned |
|
Task Progression/Updates
Author: @ person updating Date: YYYY/MM/DD
UPDATE TITLE
Include any updates here + reasoning