Page Comparison

...

1. Download PulseView from sigrok (https://sigrok.org/wiki/Downloads )

2. Run the Zadig executable from the downloaded sigrok folder that PulseView is in.

   1. There are 4 drivers Zadig can install: ibusblibusb-win32 is the driver that has worked so far.

      Image RemovedImage Added

   2. This will likely require you to restart your computer

3. Plug in the signal analyzer to the computer and open PulseView

   1. The window should automatically find the analyzer:

      

4. Connect the ground pin of the analyzer to the ground pin of the circuit or board you are testing.

5. Connect the remaining channels of the analyzer to the pins you wish to read.

6. Write signals to the pins and hit Run in PulseView to watch the signals:

...