• Fasteners and everything have been redone and are working well.

• Landing gear is okay, but unideal atm. We will want to redesign at some point, but this is not top of the list.

• No notable damage from flipping is nice?

• Not too many updates because of reading week

• Skeleton dimensions have been updated and current updates can be found here: Skeleton

• Aero-panels are in the works and updates can be found here: Aero-Panels

• Aero-panel mounting is being worked on, updates in Aero-Panel Mounting soon!

• Going to be checking in on all these projects tomorrow at mech meeting

• Not much updates, still under R&D

• Neel: Checked conops didn’t see any requirement for Passenger LED at least for scoring points, could still be something we add if we want

• Neel: No real updates, been really busy with work. Will try to do more this week.

• Image Added

  Farris:
  Few notes on things still left to do:
  Through hole components still need to be soldered on, we also didn’t get the SMD loop testpoints in the order so we’ll need to order those w the next Digikey order
  Quite a few bridges to clean up on some of the ICs
  ESP01F still needs to be ordered in the next aliexpress order and assembled. Some of the pads for it are bridged and will need to be fixed to prevent shorts
  One board is missing an 0603 green LED, 1 got lost while I was placing them
  Some of the pads for the TX modules may need to be touched up on 1 of the boards
  [5:41 PM]
  I won’t get to any of this today though, I’ve already spent a long time in the bay so I’m gonna head out

Mechanically on pause until further notice.

• discover compiled BMX160 offical sensor fusion library → currently integrating the driver

• GPS driver test in progress

• verify the actual algorithm math working

• Anthony Luo doing presentations

• more people should get trained, we need pilots!